Professionally installed interior drainage that manages groundwater and hydrostatic seepage before it reaches your finished floor or stored belongings.
Effective, proven, and installed without disturbing your yard or exterior features.
Interior systems are installed entirely from inside the basement, eliminating the landscaping and hardscaping disruption that exterior work requires.
Rather than waiting for water to accumulate, channel systems intercept it at the point of entry for immediate collection and removal.
Interior drainage is not weather-dependent. Installation can proceed in winter months when exterior excavation and membrane work are not feasible in New Albany, OH conditions.
Properly designed interior channel systems use gravity to route water to the sump pit without mechanical assistance, supplemented by the pump only when pit level reaches the activation threshold.
An interior drainage system addresses basement moisture by capturing and redirecting groundwater after it has entered the building envelope at the floor-wall joint or through weep holes at the base of the foundation wall. This differs fundamentally from exterior waterproofing, which prevents water from reaching the wall surface. Interior drainage accepts that water will enter under certain pressure conditions and provides a managed pathway for that water to reach a collection point without spreading across the basement floor or damaging finished materials. For New Albany homes where exterior excavation is impractical, cost-prohibitive, or where the moisture entry is concentrated at the perimeter footing level, interior drainage is the technically appropriate solution.
Perforated channel systems offer specific advantages over simple gravel-and-pipe installations in New Albany basements with block or stone foundations. The channel profile is engineered to sit at the footing level where hydrostatic pressure concentrates, and the wall flange extension captures seepage that occurs at the bottom course of block rather than strictly at the floor-wall joint. This distinction matters because without the wall flange, water running down the interior wall face bypasses the channel and spreads across the floor before reaching the collection point. Proper channel specification requires understanding where the moisture entry is actually occurring, which the assessment process documents before any installation begins.
The sump pit integration is the component that makes an interior drainage system fully functional. The channel system routes water to the pit, and the pump removes it from the pit before it overflows. Pit location is determined by the channel routing geometry, existing pit locations if present, and access to a discharge route. In some New Albany homes where the basement has been partially finished, the channel must be routed around finished walls and mechanicals to reach an optimal pit location. These routing decisions are made during the assessment and documented in the installation plan. The pit itself is sized to provide adequate storage volume for the expected inflow rate, ensuring the pump is not short-cycling and the system has adequate buffer during peak inflow events.
One of the most important honest assessments we provide in New Albany is explaining what interior drainage does not do. Interior systems do not treat the foundation wall itself, do not reduce hydrostatic pressure against the exterior wall surface, and do not address wall seepage that is occurring mid-wall due to horizontal cracks or structural movement. For those conditions, exterior membrane work or crack injection is the appropriate treatment. Interior drainage excels at managing water entry at the footing level, floor-wall joint seepage, and floor-level pressure seepage in situations where the foundation is structurally sound but the original waterproofing has aged or the perimeter soil conditions create chronic seepage during saturation events. We document which conditions are present in your specific New Albany basement and recommend the approach that addresses your actual moisture source, not a generic solution that covers all scenarios on paper but misses your specific entry points.
Every service performed to drainage system standards and local code requirements.
Saw-cut perimeter channel around the full basement footprint, with gravel bed, drainage channel, and sump pit connection. Complete protection for all four walls in one installation.
Learn moreFor New Albany homes where moisture entry is concentrated on one or two walls, targeted channel installation along the affected sections provides effective protection at lower cost than full perimeter treatment.
Get an assessmentThe wall flange component extends the drainage channel up behind the base of the wall to capture moisture migrating down the wall face before it reaches the floor.
Ask about wall flangesInstalling a new pit or relocating an existing one to optimize channel routing geometry and pump efficiency. Proper pit placement is the key to gravity-assisted drainage performance.
Plan your pit locationExisting interior drainage channels can become clogged with sediment, mineral deposits, or root intrusion over time. We inspect, flush, and repair existing systems in New Albany homes to restore full drainage performance.
Schedule an inspectionWhen a previously installed partial channel system needs to be extended to address additional wall sections, we design and install the expansion with clean transitions to the existing channel and updated sump pit capacity if required.
Expand your systemA methodical process that produces a drainage system built to perform for decades.
The assessment produces a written condition report that forms the basis for every specification decision in the installation plan. No work is designed without this foundation.
Diamond-blade equipment cuts the perimeter trench to specified width and depth. Cuts follow a planned route documented in the installation drawing, ending at the designated sump pit location. Dust containment is deployed to protect finished areas of the home during cutting.
Each connection point between channel sections is inspected before the next section is placed to confirm continuity and proper slope transition.
New concrete is poured over the channel system, restoring the floor surface and permanently enclosing the drainage installation. After cure, the full system is tested by introducing water at multiple points along the channel and verifying flow to the sump pit and pump activation.
The results our New Albany clients experience speak clearly.
The assessment was thorough and they explained exactly which wall sections were causing the problem. The installation took one day and the crew cleaned up completely before leaving. The following spring, which was wet, produced zero water on the basement floor for the first time in seven years.
From the assessment call to installation completion, everything was communicated clearly. The written proposal broke down every component and I understood exactly what was being installed and why before any work began.
The channel routing around our finished laundry room was handled cleanly. You cannot see where the channel runs under the new concrete. Professional work throughout.
What you need to know to make a confident decision about interior drainage.
The installation begins with saw-cutting the basement floor slab along the planned channel route, typically four to six inches from the foundation wall. The cut follows the interior perimeter of the basement and terminates at the sump pit location. Concrete is removed and the subbase is excavated to reach the footing level, then a gravel bed is placed, the drainage channel profile is set to slope toward the pit, and the wall flange is installed where specified. New concrete is poured to cap the system and restore the floor surface. Most residential installations in New Albany are completed in a single working day for standard perimeter configurations.
The functional lifespan of an interior drainage system is largely determined by the durability of the channel material and the ongoing performance of the sump pump that removes the collected water. The channel installation itself is a permanent modification to the basement floor structure. The pump requires regular testing and periodic replacement, typically every 7 to 10 years. An interior drainage system that is properly maintained in a New Albany home can provide effective moisture management indefinitely.
Interior drainage typically costs less per linear foot than exterior excavation and membrane waterproofing, primarily because the excavation equipment, soil management, and backfill work associated with exterior projects add significant cost to that scope. For most standard residential configurations in New Albany, interior drainage is a more budget-accessible solution. However, cost comparison alone should not drive the decision; the correct approach depends on the moisture entry mechanism present in your specific basement. Installing interior drainage to address a problem that is fundamentally an exterior membrane failure will provide comfort improvement but will not stop ongoing wall contact moisture, which continues to deteriorate the wall material.
Standard full perimeter interior drainage installation for a typical single-story New Albany basement is completed in one working day. Partial perimeter systems on one or two walls are typically finished in half a day. Basements with complex layouts, finished areas requiring careful routing, or multiple existing pipe penetrations crossing the channel path may extend the installation to a second day. We provide an accurate time estimate after the assessment so homeowners can plan for the dust and noise associated with saw-cutting, which is the most disruptive phase of the installation.
We offer annual drainage system inspection as part of our maintenance program in New Albany, which covers both the channel system condition and the sump pump. Catching issues like partial blockages or pump wear before they cause failure during a high-inflow event is the purpose of the inspection. Most homeowners find that scheduled annual service eliminates the reactive emergency calls that occur when a problem is discovered during a storm.
Many New Albany homeowners choose to address interior drainage before finishing a basement, which eliminates the need to remove and restore finished materials. However, we complete drainage installations in finished spaces regularly and coordinate the scope carefully to minimize disruption. The finished floor and base materials removed during installation can typically be sourced and replaced within the standard timeline of a moisture remediation project.
Our certified drainage technicians serve New Albany and surrounding New Albany, OH communities. Call today for a free on-site assessment.
Call +1-866-476-1348 for Assessment